Verifying Firewall Activity Using SDM
To activate logging using SDM, click the Con?¬?gure button at the top of the SDM home
page, and then click the Additional Tasks icon in the Tasks toolbar. In the Additional Tasks
window, expand Router Properties and click Logging. The Logging window appears, as
shown in Figure 6-21.
Figure 6-21 Logging
Router#show running-config | include ip inspect
name
Displays only the lines in
the running con?¬?guration
that contain the string ip
inspect name
Router#show running-config | include accesslist
Displays only the lines in
the running con?¬?guration
that contain the string
access-list
Router#show running-config | begin interface Displays the running
con?¬?guration beginning at
the ?¬?rst instance of the
word interface
Verifying Firewall Activity Using SDM 159
To modify your logging settings, click the Edit button in the upper-right corner of the
window. Choose the Logging Level you want, as shown in Figure 6-22, and click OK.
Figure 6-22 Logging Level
After ?¬?rewall logging has been activated, you can view the ?¬?rewall log by clicking the
Monitor icon in the top navigation bar, clicking the Logging icon in the Tasks toolbar on
the left, and clicking the Firewall Log tab, as shown in Figure 6-23.
Pages:
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135