3(4)T.
The duration of time in
which login attempts are
denied is known as the
quiet period. The quiet
period can be set from
1??“65535 seconds. Failed
login attempts range
from 1??“65535 tries. The
amount of time in which
the failed login attempts
must be made before
the quiet period is
triggered ranges from
1??“65535 seconds.
NOTE: You must issue
the login block-for
command before using
any other login
commands.
NOTE: All login
attempts made via
Telnet, Secure Shell
(SSH), and HTTP are
denied during the quiet
period; no ACLs are
exempt from the login
period until the login
quiet-mode access-class
command is issued.
Router(config)#login delay 10 Sets a delay between
successive login attempts
NOTE: If the login
delay command is not
used, a default time of
1 second is set after
the login block-for
command is con?¬?gured.
Setting Multiple Privilege Levels 97
Setting Timeouts
Setting Multiple Privilege Levels
Router#show login Displays login parameters
Router#show login failures Displays login failures
Router(config)#line console 0 Moves to console line
con?¬?guration mode
Router(config-line)#exec-timeout 2 30 Sets the console to log out
after 2 minutes and 30
seconds of inactivity
NOTE: The exectimeout
command is
read as minutes and
seconds.
Pages:
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90