All configuration changes will be shown. For a
detailed
explanation of how the configuration changes
enhance security
and any possible side effects, please refer to
Cisco.com for
Autosecure documentation.
At any prompt you may enter ??????™ for help.
Use ctrl-c to abort this session at any
prompt.
Gathering information about the router for
AutoSecure
Is this router connected to internet? [no]: y
Enter the number of interfaces facing the
internet [1]: 1
Prompts the user to enter y
if the device is connected
to the Internet
Prompts the user to enter
the number of interfaces
facing the Internet
78 Locking Down Routers with AutoSecure
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0 192.168.100.1 YES NVRAM up up
GigabitEthernet0/1 192.31.7.1 YES manual up up
FastEthernet0/1/0 unassigned YES unset up down
FastEthernet0/1/1 unassigned YES unset up down
FastEthernet0/1/2 unassigned YES unset up down
FastEthernet0/1/3 unassigned YES unset up down
FastEthernet0/1/4 unassigned YES unset up down
FastEthernet0/1/5 unassigned YES unset up down
FastEthernet0/1/6 unassigned YES unset up down
FastEthernet0/1/7 unassigned YES unset up down
FastEthernet0/1/8 unassigned YES unset up down
Serial0/2/0 unassigned YES NVRAM administratively down down
Serial0/2/1 unassigned YES NVRAM administratively down down
Vlan1 unassigned YES NVRAM up down
Enter the interface name that is facing the
internet: gigabitethernet0/1
Prompts the user to enter
the name of the interface
that is facing the Internet.
Pages:
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78