10.20.1
De?¬?nes a remote IP to
communicate with the
peer
Con?¬?guring Easy VPN Server Using Cisco SDM 65
Step 5: Apply the Programming at the Interface
Con?¬?guring Easy VPN Server Using Cisco SDM
This section refers to the network topology shown in Figure 4-1 and provides details about
the con?¬?guration of Easy VPN Server:
Step 1. Start the Cisco Security Device Manager application at 192.168.30.1, the
Winnipeg router LAN segment interface.
Step 2. Choose Home > Configure > VPN > Tasks > Easy VPN Server.
HSRP2(config-ipc-remote-sctp)#exit Returns to local-ip
con?¬?guration mode
HSRP2(config-ipc-protocol-sctp)#exit Returns to con?¬?g-ipczoneassoc
mode
HSRP2(config-ipczone-assoc)#exit Returns to con?¬?g-ipczone
mode
HSRP2(config-ipczone)#exit Returns to global
con?¬?guration mode
HSRP2(config)#
HSRP1(config)#interface fastethernet 0/0 Enters interface
con?¬?guration mode
HSRP1(config-if)#crypto map TO-OUTSIDE
redundancy HSRP-OUT stateful
Applies the crypto map to
the WAN-facing interface
HSRP1(config-if)#end Returns to privileged
EXEC mode
HSRP1#
HSRP2(config)#interface fastethernet 0/0 Enters interface
con?¬?guration mode
HSRP2(config-if)#crypto map TO-OUTSIDE
redundancy HSRP-OUT stateful
Applies the crypto map to
the WAN-facing interface
HSRP2(config-if)#end Returns to privileged
EXEC mode
HSRP2#
66 Con?¬?guring Easy VPN Server Using Cisco SDM
Step 3.
Pages:
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71