10.30.1 10.10.30.5
Excludes an IP address
range from being offered
by the router??™s DHCP
service
Edmonton(config)#ip dhcp pool CLIENT-30 Enters dhcp-con?¬?g mode
for the pool CLIENT-30
Edmonton(dhcp-config)#network 10.10.30.0
255.255.255.0
De?¬?nes the IP network
address
Edmonton(dhcp-config)#default-router
10.10.30.1
Declares the router??™s
vlan10 interface address as
a gateway address
Edmonton(dhcp-config)#import all Imports DHCP option
parameters into the DHCP
server database from
external DHCP service
NOTE: Any manually
con?¬?gured DHCP option
parameters override the
equivalent imported
DHCP option parameters.
Because they are
obtained dynamically,
these imported DHCP
option parameters are
not part of the router
con?¬?guration and are
not saved in NVRAM.
Edmonton(dhcp-config)#dns-server 10.10.30.2 Declares any required
DNS server address(es)
Edmonton(dhcp-config)#exit Exits dhcp-con?¬?g mode
Edmonton(config)#interface ethernet2/0 Enters interface mode
Edmonton(config-if)#ip nat inside Speci?¬?es the interface as
an inside local (LAN side)
interface
Con?¬?guring PPPoA 11
Step 7: Verify a PPPoE Connection
Con?¬?guring PPPoA
The programming steps for con?¬?guring PPP over ATM (PPPoA) on an ATM interface are
as follows:
Step 1.
Pages:
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31