To enable this functionality,
do the following:
1. On the ISA server, open the ISA Server Management Console.
2. From the Console, click on Configuration, Networks in the console tree.
3. In the Details pane, select the Networks tab.
4. Right-click the network where auto discovery is to be enabled (for example, the
internal network) and click Properties.
5. Select the Auto Discovery tab.
6. Check the box for Publish Automatic Discovery Information, as shown in Figure
11.6, and click OK.
7. Click Apply in the Details pane and click OK.
CHAPTER 11 Understanding Client Deployment Scenarios with ISA Server 2006
FIGURE 11.5 Creating a DNS Wpad entry for ISA client automatic configuration.
305
11
Installing the ISA Firewall Client
FIGURE 11.6 Publishing auto discovery information for ISA Server Firewall clients.
Installing the ISA Firewall Client
After the necessary server configuration is complete, the actual client software can be
installed. There are several different installation options, as follows:
. Manual installation
. Unattended installation
. Automatic group policy installation
Each of these installation options has its particular pros and cons, as described in this
section.
Pages:
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517