???
Creating a PPTP Site-to-Site VPN Connection
The first step in setting up a PPTP site-to-site VPN connection is to configure the remote
site network definition. To do this, perform the following steps:
1. Open the ISA Server Management Console.
2. Select the Virtual Private Networks (VPN) node from the console tree.
3. Select the Remote Sites tab from the Details pane.
4. Select Create VPN Site-to-Site Connection from the Tasks pane.
5. Enter the name of the connection in the Network Name field; for example, enter
Toronto and click Next.
6. Select Point-to-Point Tunneling Protocol (PPTP), as shown in Figure 10.8, then
click Next.
7. Click OK when prompted about needing to create a remote user account.
8. Enter the IP address of the external interface of the remote ISA server (for example,
12.155.166.151), and then click Next.
9. Check the box labeled Local Site Can Initiate Connections to Remote Site Using
These Credentials.
10. Enter the username, domain name, and password of the local user account in the
remote site that was created in the previous steps and click Next. For our example,
we enter a username of SanFrancisco, domain name of SERVER11 (the local server
account in Toronto), and the password we used to create the account on the
remote server.
Pages:
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493