9
iPod Repair QuickSteps Does Not Compute: Replacing the Logic Board 135
136 PC QuickSteps Getting to Know Your PC 1 2 3 4 5 6 7 8 9 10
10. Unplug the Click Wheel from the logic board (see Figure 9-36).
11. Connect the Click Wheel to the new logic board.
12. Place the new logic board in the frame.
13. Connect the screen to the new logic board.
14. Put the front panel of the iPod back onto the frame.
15. Replace the six Phillips-head screws.
16. Clip the screen??™s ribbon cable connector down.
17. Plug the hard drive back into the hard drive connector.
18. Attach the audio jack ribbon cable into the connector on the new logic board.
19. Rotate the hard drive, and place it in the iPod.
20. Plug the battery??™s ribbon cable into the new logic board.
21. Put the iPod back together.
Replace Your iPod Mini??™s Logic Board
Table 9-2 shows the tools needed and the difficulty level of replacing the logic
board in an iPod mini.
To replace the logic board of a first- or second-generation iPod mini:
1. Open the iPod according to the instructions in Chapter 3.
Pages:
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182