11. Plug the battery into the new logic board.
12. Plug the hard drive connector into the new logic board.
13. Slide the hard drive back into the connector.
14. Plug the audio jack into the new logic board.
15. Snap the iPod back together.
Replace the Logic Board in a Fourth-
Generation iPod or an iPod Photo
To replace the logic board in a fourth-generation monochrome iPod or an iPod
photo:
1. Open the iPod according to the instructions in Chapter 3.
2. Unplug the audio jack from the logic board.
3. Slide the hard drive from the hard drive connector, and remove the hard drive from
the iPod.
4. Unplug the battery from the logic board, and remove the battery (see Figure 9-22).
Figure 9-21: Remove the logic board.
Figure 9-22: Remove the battery.
Connector
9
iPod Repair QuickSteps Does Not Compute: Replacing the Logic Board 131
132 PC QuickSteps Getting to Know Your PC 1 2 3 4 5 6 7 8 9 10
5. Remove the black tape covering the hard drive connector (see Figure 9-23). Keep the
tape, however, because you??™ll need it later.
6. Notice the exposed T6 Torx screws.
Pages:
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178