This connector also
has a brown clip that works like
the one in step 2.
4. Carefully lift the hard drive, disconnect it using the black clip (which works just like the
brown clips from the previous steps), and remove it (see Figure 8-35).
5. Notice the six Phillips-head screws??”three on each side??”that hold the front panel of
the iPod to the frame. Remove all six screws (see Figure 8-36).
6. Separate the front panel of the iPod from the screen and the logic board (see Figures 8-37
and 8-38).
Figure 8-33: Remove the battery cable.
Figure 8-34: Remove the audio jack cable.
Figure 8-35: Remove the hard drive.
Brown clip
8 116 iPod Repair QuickSteps Facing the Music: Replacing the Front Panel or Shell
PC QuickSteps Getting to Know Your PC 117
10 9 8 7 6 5 4 3 2 1
7. Put the new front panel onto the frame.
8. Replace the six Phillips-head screws.
9. Plug the hard drive back into the hard drive connector.
10. Reattach the audio jack ribbon cable into the connector on the logic board.
11. Rotate the hard drive, and place it in the iPod.
12. Plug the battery??™s ribbon cable back into the logic board.
Pages:
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163