Figure 8-31: Remove the logic board.
Figure 8-32: Remove the screen.
Connector
8
iPod Repair QuickSteps Facing the Music: Replacing the Front Panel or Shell 115
116 PC QuickSteps Getting to Know Your PC 1 2 3 4 5 6 7 8 9 10
13. Reconnect the screen to the logic board.
14. Reconnect the Click Wheel to the logic board.
15. Replace all the T6 Torx screws.
16. Plug the battery back into the logic board.
17. Replace the black tape over the hard drive connector.
18. Plug the audio jack back in.
19. Put the iPod back together.
Replace the Front Panel in an iPod Video
To replace the front panel in a fifth-generation iPod:
1. Open the iPod according to the instructions in Chapter 3.
2. At the bottom of the unit, find and
disconnect the ribbon cable from
the battery (see Figure 8-33).
There is a brown clip that you can
pull up to make the cable easier
to remove. Be gentle with this clip,
though, as it can pop off. Also,
grip the cable near the connector,
not where you see the fingers in
the figure.
3. Find and disconnect the ribbon
cable from the audio jack (see
Figure 8-34).
Pages:
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162