12. Replace all six T6 Torx screws.
13. Plug the battery back into the logic board.
14. Plug the hard drive connector back into the logic board.
15. Slide the hard drive back into the connector.
16. Plug the audio jack back in.
17. Snap the iPod back together.
Replace the Front Panel in a Fourth-Generation
iPod or an iPod Photo
To replace the front panel in a fourth-generation monochrome iPod or an iPod
photo:
1. Open the iPod according to the instructions in Chapter 3.
2. Unplug the audio jack from the logic board (see Figure 8-25).
Figure 8-24: Unplug the screen.
Figure 8-25: Unplug the audio jack.
8
iPod Repair QuickSteps Facing the Music: Replacing the Front Panel or Shell 113
114 PC QuickSteps Getting to Know Your PC 1 2 3 4 5 6 7 8 9 10
Figure 8-29: Unclip the Click Wheel??™s ribbon cable.
3. Slide the hard drive from the hard drive
connector, and remove the hard drive
from the iPod.
4. Unplug the battery from the logic board,
and remove the battery (see Figure 8-26).
5. Remove the black tape covering the hard
drive connector (see Figure 8-27).
Pages:
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160