Figure 5-35: Remove the audio jack cable.
Figure 5-36: Remove the hard drive.
Figure 5-37: Unclip the screen.
Figure 5-38: Remove the screws.
Screw
5 72 iPod Repair QuickSteps Can??™t See a Thing: Replacing Broken Screens
PC QuickSteps Getting to Know Your PC 73
10 9 8 7 6 5 4 3 2 1
7. Separate the front of the iPod from the screen and the logic board (see Figure 5-39).
8. Pull the screen out of the logic board (see Figure 5-40).
9. Put the new screen where the old one was.
10. Put the front of the iPod back onto the frame.
11. Replace the six Phillips-head screws.
Figure 5-39: Remove the front of the iPod.
Figure 5-40: Remove the screen.
5
iPod Repair QuickSteps Can??™t See a Thing: Replacing Broken Screens 73
74 PC QuickSteps Getting to Know Your PC 1 2 3 4 5 6 7 8 9 10
12. Clip the screen??™s ribbon connector down.
13. Plug the hard drive back into the hard drive connector.
14. Reattach the audio jack ribbon cable into the connector on the logic board.
15. Rotate the hard drive, and place it in the iPod.
16. Plug the battery??™s ribbon cable back into the logic board.
Pages:
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114