Carefully lift the logic board enough to release the scroll wheel??™s connector
(see Figure 5-14).
10. Remove the logic board (see Figure 5-15).
11. Release the white side clips holding the screen to the logic board (see Figure 5-16).
Figure 5-16: Unclip the screen.
Figure 5-15: Remove the logic board.
Figure 5-14: Release the scroll wheel??™s connector.
5
iPod Repair QuickSteps Can??™t See a Thing: Replacing Broken Screens 65
66 PC QuickSteps Getting to Know Your PC 1 2 3 4 5 6 7 8 9 10
12. Carefully unplug the connector holding the screen to the logic board (see Figure 5-17).
13. Connect the new screen.
14. Place the logic board back in the iPod, and screw in all eight T6 Torx screws.
15. Plug in the scroll wheel??™s ribbon cable.
16. Reattach the hard drive connector, and replace the blue piece of rubber.
17. Slide the hard drive into place.
18. Plug the battery into the logic board, and place the battery on top of the hard drive.
19. Put the iPod back together.
Replace the Screen in a Third-Generation iPod
To replace the screen in a third-generation iPod:
1.
Pages:
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108