10. Put the iPod back together.
Replace the Battery in an iPod Video
To replace the battery in a fifth-generation iPod:
1. Open your iPod according to the instructions in Chapter 3.
2. Disconnect the battery from its connector (see Figure 4-18). Notice the small clip;
carefully pull it up.
Figure 4-17: Reconnect the audio jack.
Figure 4-18: Unplug the battery.
4
iPod Repair QuickSteps Power Issues: Replacing Your Battery and Other Power Concerns 51
52 PC QuickSteps Getting to Know Your PC 1 2 3 4 5 6 7 8 9 10
3. Carefully lift up the hard drive (see Figure 4-19).
4. Still holding the hard drive, unclip the audio jack from the logic board (see Figure 4-20).
5. Carefully pry the battery from the back of the iPod (see Figure 4-21). The battery is
glued into place.
6. Place the new battery on the back of the iPod (see Figure 4-22).
Figure 4-19: Lift up the hard drive.
Figure 4-20: Release the audio jack.
Figure 4-21: Pry off the battery. Figure 4-22: Place the new battery.
4 52 iPod Repair QuickSteps Power Issues: Replacing Your Battery and Other Power Concerns
PC QuickSteps Getting to Know Your PC 53
10 9 8 7 6 5 4 3 2 1
7.
Pages:
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96