Open your iPod according to the instructions in Chapter 3.
2. Disconnect the audio jack from the logic board.
3. Carefully slide the hard drive from the hard drive connector.
4. Unplug the battery.
5. Carefully remove the battery from the iPod (see Figure 4-15). The battery is glued
down with some adhesive; you will most likely need to pry it out with your plastic
opening tool or flat-headed screwdriver.
6. Place the new battery in the iPod (see Figure 4-16).
7. Reconnect the battery cable, and make sure to tuck it away properly. Normally, you place
the cable under the logic board. Figure 4-16: Put the new battery in the iPod.
Figure 4-14: Plug in the audio jack.
Figure 4-15: Remove the battery.
4 50 iPod Repair QuickSteps Power Issues: Replacing Your Battery and Other Power Concerns
PC QuickSteps Getting to Know Your PC 51
10 9 8 7 6 5 4 3 2 1
8. Slide the hard drive back into the hard drive connector. Make sure that the hard drive is
fully connected; you don??™t want a loose connection.
9. Plug the audio jack back into the logic board (see Figure 4-17).
Pages:
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95