4. Plug the new battery into the logic board (see Figure 4-3).
5. Put the new battery where the old one was, exactly as it was (see Figure 4-4).
6. Put the iPod back together.
Figure 4-3: Plug in the new battery.
Figure 4-4: Put the new
battery into place.
Figure 4-2: Remove the battery from the iPod.
4 46 iPod Repair QuickSteps Power Issues: Replacing Your Battery and Other Power Concerns
PC QuickSteps Getting to Know Your PC 47
10 9 8 7 6 5 4 3 2 1
Replace the Battery in a Third-Generation iPod
To replace the battery in a third-generation iPod:
1. Open the iPod according to the instructions in Chapter 3.
2. Disconnect the audio jack (see Figure 4-5). If you don??™t disconnect the audio jack,
you will have problems.
3. Slide the hard drive from the hard drive connector (see Figure 4-6).
4. Unplug the hard drive connector from the logic board (see Figure 4-7).
Figure 4-5: Disconnect the audio jack.
Figure 4-7: Disconnect the
hard drive connector.
Figure 4-6: Remove the hard drive.
4
iPod Repair QuickSteps Power Issues: Replacing Your Battery and Other Power Concerns 47
48 PC QuickSteps Getting to Know Your PC 1 2 3 4 5 6 7 8 9 10
5.
Pages:
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93