With your Phillips-head screwdriver, remove both screws.
4. At the bottom of the iPod mini, you see a small piece of metal. You need to remove
it, but don??™t worry. It should come out easily enough. The piece of metal is springclipped
in place. Dislodge the two clips; a screwdriver works better here than your
Figure 3-9: Remove the screws on the top.
Figure 3-8: Pry off the plastic pieces.
3
iPod Repair QuickSteps Cracking the Case 35
36 PC QuickSteps Getting to Know Your PC 1 2 3 4 5 6 7 8 9 10
plastic tool. Then pry out the piece of metal with your plastic tool or flat-headed
screwdriver (see Figure 3-10).
Figure 3-10: Pry out the piece of metal on the bottom.
Figure 3-11: Unplug the Click Wheel connector.
Figure 3-12: Slide out the insides.
5. Behind the piece of metal, you see the button of the Click Wheel.
Gently??”for the love of Janis, gently??”unplug the Click Wheel
connector (see Figure 3-11).
6. Carefully push from the bottom, and slide the insides of the iPod
mini out through the top (see Figure 3-12) as you hum ???Within
You Without You??? from Sgt.
Pages:
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82